[an error occurred while processing this directive]
The PL self-adhesive film is a luminescent product produced on the basis of long afterglow photoluminescent powder, a component that is independently developed by Minhui. It is a photoluminescent film made of soft plastic, backed with adhesive paper, nontoxic and harmless. It doesn’t contain any radioactive elements and is characterized by quick light absorption, longer afterglow and longer service life.

The substrate material of this photoluminescent film is PVC or acrylic resin, which is mixed with photoluminescent materials under specific process. It is stable in areas with large temperature difference, features quick light absorption and long afterglow duration, and takes the lead in luminance, thermoplastic and adhesive performance among all its peers.

At present, there are four categories of Photoluminescent self-adhesive film: PVC series, PET series, Acrylic series, and thermal transfer series.

1. PVC series photoluminescent self-adhesive film is made from high quality strontium aluminate luminescent pigment which is manufactured by Minhui mixing with PVC paste resin. This product has well flame resistance performance, easy printable performance. Its luminescent colors include yellow-green, blue-green and sky-blue. At present, PVC series photoluminescent self-adhesive film is the most widely used in the market.
2. PET series photoluminescent self-adhesive film is manufactured by coating on PET film by mixing high quality strontium aluminate luminescent pigment which is manufactured by Minhui with acrylic resin. This product possesses very glossy surface, stable property, but is not good for common printing.
3. Acrylic series photoluminescent self-adhesive film is manufactured by coating on released substrate by mixing high quality strontium aluminate luminescent pigment which is manufactured by Minhui with acrylic resin. This product has well weather resistance performance, printable and tearing.
4. Thermal transfer series photoluminescent self-adhesive film is made from high quality strontium aluminate luminescent pigment which is manufactured by Minhui mixing with hot melt. This product has transferable performance, which is suitable for hot stamping on cloth and garment decoration.




Notes & Notices for Use:
1.It should be applied to evenly spread surface at the temperature of 10~40℃.
2.Photoluminescent self-adhesive film can be cut into different shapes and glued to specific place (such as telephone set, switch, etc) for decoration and indication.
3.Photoluminescent self-adhesive film surface can be printed with silk screen pattern or word to have a substrate glow effect.
4.When the film is applied to the surface of any object, it should be cleaned and free of oil stain, dust, and any other impurity.
5.Because the film expands in heat and shrinks in coldness, cautious storage is required for film after specific cutout. Meanwhile, it should be clamped or pressed with weight to prevent distortion and curling.
6.Back paper of the film should be removed before use. The film should be applied to object surface with certain press. Special notice should be given to the corner and film edge during application.
7.To guarantee the luminance, photoluminescent self-adhesive film of same series will have color difference with respect to different lots.
8.For a photoluminescent self-adhesive film exceed 10M in length, there will be a laced junction.
9.The remaining film (roll) after application should be enlaced as tightly as possible.

Package & Storage:
1.Package: in roll or sheet, externally packaged with plastic film, then carton packing.
2.Transportation: Measures should be taken to prevent collision, extrusion, sun and rain.
3.Storage: stored in ventilated, dry, and cool warehouse whose ambient temperature is 10-40 ℃ and relative humidity below 70%.
Above suggestions are only for reference. In case of any question, you may consult us by sending email to
service@mphotoluminescent.com