Photoluminescent Pigment — All Series
We make all the glow in the dark colors you can think of.
Four product lines covering the full range of glow performance, color and application requirements. Select a series to explore grades and specifications.
Premium rare-earth doped strontium aluminate photoluminescent pigment with industry-leading brightness, long glow hours, and even grain sizes.
The global standard for safety signage, emergency markings and any application where maximum glow performance is critical.
Encapsulated glow in the dark powders for direct dispersion into water-based paints, inks and coatings without hydrolysis or luminance loss.
Zinc sulfide photoluminescent pigments and other sulfide based pigment with unique glow colors.
Strontium aluminate photoluminescent pigment blended with fluorescent pigments for vivid day color and colored afterglow.
Request a sample or bulk quote
Tell us the model and order quantity. We'll confirm pricing and arrange samples right away.
Not sure which grade to choose?
- Share your application process and we will recommend the right model for you.
Built for Demanding Production
High-Performance Photoluminescent Pigment: Certified, Premium Quality, Factory Direct
Photoluminescent Pigment For Every Industry
Select your application to see recommended series, grade and particle size, or contact our technical team for a custom recommendation.
Why Choose Us
Why Source from Zhejiang Minhui Luminous?
China's leading photoluminescent materials manufacturer: from raw pigment synthesis to finished glow-in-the-dark products.
INDUSTRY Experience
Certified
Factory Area
Employees
Annual PIGMENT Output
- ✔ Unmatched Production Capacity: 7 kiln lines, 70+ powder processing units. No supply chain risk or middlemen — you order directly from the manufacturer.
- ✔ R&D Leadership: 5 specialist labs, 200+ global patents, $500K+ annual R&D investment. Custom grades developed to your specification.
- ✔ Standard-Setter: Key contributor to 3 Chinese national and industry standards. Management member of the international Photoluminescent Safety Products Association (PSPA) and Chinese Rare Earth Association.
- ✔ Global OEM/ODM: ISO 9001 quality system with REACH, RoHS, and ASTM compliance documentation ready for B2B procurement.
- ✔ Free Samples: Trial orders accommodated with no risk. Technical team provides grade recommendation and application guidance before sampling.
4-Stage Quality Control Process
Every batch passes four mandatory checkpoints before leaving our factory. Full batch traceability from raw material to shipment.
Material Analysis
Long-term qualified supplier partnerships ensure consistent high-purity raw material for every production run.
Sintering Control
Atmosphere-controlled kilns with real-time temperature curve monitoring for consistent crystal structure.
Luminance Test
Every batch tested for brightness and particle size distribution. Full traceability for every bag shipped.
Batch Release
Final COA generated. Samples retained 5+ years for re-testing if any post-delivery dispute arises.
Frequently Asked Questions
Common questions about photoluminescent pigments, ordering, customization and compatibility.
Strontium aluminate photoluminescent pigment (SrAl2O4:Eu2+,Dy3+) is an inorganic compound that absorbs energy from visible light or UV radiation and releases it slowly as visible glow in the dark.
The added rare earth elements act as the luminescence center and energy trap that stores charge and prolongs afterglow duration.
Compared to the traditional zinc sulfide-based photoluminescent pigment (ZnS:Cu), strontium aluminate based photoluminescent pigment delivers 10x higher brightness and afterglow duration.
Yes, the 12-hour figure is measured according to DIN 67510, using a D65 light source at 1000 lx for 5 minutes of excitation, and tracking afterglow until luminance decays to 0.3 mcd/m², which is the threshold at which the human eye can still detect glow in darkness.
In practice, photoluminescent pigment is a low-intensity light source designed for dark environments. Whether it appears "bright enough" at any given moment is subjective, some users find the glow clearly sufficient after several hours, while others may feel it it not bright enough. Perception also varies with environment: in a room with residual ambient light, the glow will appear dimmer than in darkness.
For this reason, international standards such as ISO 17398 and DIN 67510 do not measure glow duration alone. The two most meaningful performance indicators are luminance at 10 minutes and luminance at 60 minutes after excitation, measured in mcd/m². These values give a consistent, objective basis for comparing pigment performance and selecting the right grade for your application.
The most reliable way is to compare published luminance data measured under the same test conditions, such as DIN 67510. If a supplier only quotes glow hours without mcd/m² figures, treat that as a red flag.
Look for brightness values (in mcd/m²) at 10 minutes and 60 minutes after excitation. Both figures matter, as some pigments look bright initially but decay quickly.
Our standard test conditions for photoluminescent pigment is: D65 light source, 1,000 lux, 10 minutes excitation.
If you don't have a luminance meter, you can do a practical comparison yourself:
Place samples of equal thickness under the same light source for 15 minutes, then move to a completely dark room. Observe brightness at 10 minutes and 60 minutes in the dark.
Invite several people to observe together. Human eyes adapt differently to darkness, so multiple observers give a more consistent result.
Human eyes are most sensitive to light in the 507-555 nm range in low-light conditions, and yellow-green strontium aluminate photoluminescent pigment has a emission wavelength of around 520nm. Therefore human eyes are very sensitive to green glow color in dark environments.
Also, yellow-green glow color is made with strontium aluminate based photoluminescent pigment, which is the type of photoluminescent pigment that has the strongest afterglow intensity.
This makes green strontium aluminate pigment the global standard for safety signage, emergency evacuation markings, and all applications where maximum visibility in darkness is critical.
Glow in the dark powder is suitable for application including printing, coating, spray painting, casting, injection molding, fiber drawing, powder coating, ceramic, glass, and so much more.
We recommend you to add the pigment into transparent or semi-transparent medium so its luminosity will not be influenced.
Always verify compatibility with a small-scale trial before full production. To get the best model, please send us your product type and application process, then we can recommend you with the most suitable grain sizes and luminosity.
No. Our photoluminescent pigment is non-toxic, non-radioactive, and skin safe. It is suitable for making most industrial and consumer products.
Our strontium aluminate photoluminescent pigment is tested and complies with international standards including EU REACH Regulation, RoHS, ASTM, etc.
Full compliance documentation and test reports are available upon purchase.
Our MOQ (minimum order quantity) starts from 1KG.
We provide free samples to test before ordering in bulk. Contact us with your product type and application details, then we will recommend the most suitable grade and arrange sample shipment.
For bulk orders, please inquire directly for pricing.
How To Order:
Order from us is very simple. You can contact us by filling out the contact us form, or send your inquiry directly to our email sales@mphotoluminescent.com.
You can also call us at 86-579-88948789, our factory's work time is from 8AM to 5PM (UTC+8) Monday to Saturday.
Please let us know your application, requirement and order amount, then we will reply to you by email and provide a quotation to you within 24 hours. We always provide free sample for evaluation before bulk orders.
Payment:
We accept bank transfer, PayPal, Western Union, VTB and Alibaba pay.
Shipping:
We offer worldwide shipping.
For small orders, we partner with express courier including DHL, FEDEX and UPS.
For large orders, we ship by air/sea/railway.
Shipping time depends on the volume, shipping company and logistic condition. For express courier, it usually takes 3-6 days to arrive in Asia, 5-8 days to arrive in North America, Australia and Europe, 6-9 days to arrive in South America.
Factory Visit:
Our factory is located in No. 668, Yingbin Road, Shanghua District, Lanxi City, Zhejiang Province, China.
We welcome you to visit our factory at any time.