Photoluminescent Pigment For Resin

Short Description:

Photoluminescent resin, also known as glow in the dark resin, is formulated with photoluminescent pigments, binders and various additives. After absorbing light for 10-30 minutes, it can continue to emit light for 12 hours in the dark. It be used for low-level emergency lighting, signage and markings, and decorations. We recommend our customers to take photoluminescent pigment with a grain size of class B, C or D.

For more details, please scroll down to see Product Detail and Specification.


  • FOB price: GET LASTEST PRICE
  • Product Code: MHG
  • Molecular Formula: SrAl2O4:Eu+2,Dy+3
  • Chemical Name: Strontium aluminate doped with rare earth
  • Day/Glow Color: Light white/Blue-green; Light yellow/Yellow-green
  • Grain Size: Ranges from 25~55um, please see Specification below
  • Product Detail

    Specification

    Introduction

    Photoluminescent resin, also known as glow in the dark resin, is formulated with photoluminescent pigments, binders and various additives. Our photoluminescent pigment is non-radioactive, non-toxic,very weatherproof, very chemically stable and with a long shelf life of 15 years. After absorbing light for 10-30 minutes, it can continue to emit light for 12 hours in the dark, and the process of light absorption and light emission can be infinitely cycled. Photoluminescent resin be used for low-level emergency lighting, signage and markings, and decorations.

     

    Recommendation

    Photoluminescent pigment produced by MINHUI is classified into A, B, C, D, E, etc. according to the particle size. In a broad sense, all sizes can be used for making glow in the dark resin. However, to acheive the optimal result, we should select suitable size according to the actual process and final products. For example, for casting of resin, we recommend our photoluminescent pigment fo class B or class C. For coating, we recommend pigment of class C or D. For spraying, we recommend pigment of class D or E.

    MHG (yellow-green) and MHB(blue-green), which are strontium aluminate doped with rare earth, are two kind of photoluminescent pigment with the brightest glow color, thus will make great glow in the dark resin. If the resin is water-based or the final product may be exposed to humid environment for a long time, we recommend choosing our MH-**W series, the waterproof photoluminescent pigments. Nonwaterproof pholuminescent pigments will be slowly hydrolyzed when soaked in water for a long time, and gradually lose their luminescent properties.

    For luminance statistics of MINHUI's pigment, please see Specification.

    MH serie's photoluminescent pigment meets the US requirement of ASTM F963-16 (Standard Consumer Safety Specification on Toy Safety), Test Method CPSC-CH-E1003-09.1 for total Lead, and  ASTM F 963-16 (Clause 8.3) for soluable heavy metal; and registered for EU REACH standard in accordance with the REACH regulation (EC) No 1907/2006. 

     

    Application

    Photoluminecent pigment can be mixed with resin, paint, plastic, glass, ink, nail polish, rubber, silicone, glue, powder coating and ceramics to make their glow in the dark version. It has been widely applied to fire-fighting safety signs, fishing tool, craftworks, jewelry, watches, textiles, toys and gifts, and so on.

    Below is our brief introduction on how to make glow in the dark resin.

    1. Our photoluminescent pigment used is a kind of weak alkaline substances, so it is better to select the resin to be neutral or weakly alkaline. The resin that bonds the pigments together should have good light transmittance and no covering power, therefore should be transparent or light-colored.

    2. You can select these kinds of resin or varnish: epoxy resin, polyurethane resin (or varnish), amino varnish, polyester resin (or varnish), acrylic resin (or varnish), hydroxyl acrylic resin, acrylic polyurethane varnish (two-component) , Light-colored alkyd varnish, fluorocarbon paint, etc.

    3. Dosage of photoluminescent pigment: The amount of pigment can be adjusted according to the required luminous brightness and luminous time. The recommended ratio is 20-50% (weight ratio).

    For more details on how to make glow in the dark paint, please refer to our How To Make Glow In The Dark Paint With Photoluminescent Pigment – A Guide By Zhejiang Minhui.

    To get custom solutions from our professionals, please send a message to us or email us at sales@mphotoluminescent.com

     

    For more information about photoluminescent pigment, please refer to our FAQS page

     

     


  • Previous:
  • Next:

  • MHG Series Photoluminescent Pigment For Resin Specification

    Model

    Size (D50)um

    Afterglow Intensity (mcd/㎡)

    Glowing color (Night) Appearance (Daytime)

    10 min

    60 min

    Glow  time

    MHG-6B

    65~85

    725

    120

    >12 hour

    a5adea3c Yellow-green

    44f4c8dc Light-yellow

    MHG-6C

    45~55

    480

    85

    MHG-6D

    25~35

    380

    55

    MHG-6E

    5~15

    280

    39

    MHG-6F

    2~10

    240

    30

    MHG-4B

    65~85

    640

    105

    MHG-4C

    45~55

    450

    70

    MHG-4D

    25~35

    320

    42

    MHG-4E

    5~15

    220

    29

    MHG-4F

    2~10

    190

    23

    MHG-2C

    55~75

    350

    40

    MHG-2D

    15~45

    250

    32

    MHG-1C

    55~75

    260

    35

    10hour

    MHG-1D

    15~40

    200

    25

     

    MHB Series Photoluminescent Pigment For Resin Specification

    Model

    Size
    (D50)um

    Afterglow Intensity(mcd/㎡)

    Glowing color (Night) Appearance
    (Daytime)

    10 min

    60 min

    Glow  time

    MHB-5B

    65~85

    700

    120

    >12 hour

    MHB a
    Blue-green

    MHB b
    Light-white

    MHB-5C

    45~55

    480

    85

    MHB-5D

    25~35

    360

    58

    MHB-5E

    5~15

    260

    38

    MHB-4B

    65~85

    630

    110

    MHB-4C

    45~55

    440

    75

    MHB-4D

    15~35

    320

    50

    MHB-3C

    55~75

    400

    55

    MHB-3D

    15~45

    280

    35

    MHB-1C

    55~75

    260

    38

    10hour

    MHB-1D

    15~40

    200

    23

     

     

    Note:

    1.Luminance test conditions: D65 standard light source at 1000LX luminous flux density for 10min of excitation.

    2. Particle size B is recommended for production craft of pouring, reverse mould, etc. Particle size C and D are recommended for printing, coating, injection, etc. Particle size E and F are recommended for printing, wiredrawing, etc.

  • Send your message to us:

    Write your message here and send it to us

    Request Information Contact us

    Send your message to us:

    Write your message here and send it to us