MHP-7371 Photoluminescent Heat Transfer Vinyl
MHP-7371 Photoluminescent Heat Transfer Vinyl Description
OEKO-TEX 100
25X Wash Durability
1-160 cm Width
MHP-7371 has ISO 17398 Class C luminosity and over 12 hours of glow time (measured down to the 0.3 mcd/m²). It is non-toxic, non-harmful, and non-radioactive.
It can be easily cut into various patterns with a laser, plotter, or die cutting, great for making hi-vis PPE, workwear, casual wear, and accessories.
MHP-7371 Photoluminescent HTV Specification
We can customize the tape size(1-160cm wide), patterns, and luminosity grades to meet your specific requirements.
| Product model | MHP-7371 |
| Product type | Photoluminescent heat transfer vinyl (glow in the dark heat transfer vinyl) |
| Base material | PES hot melt adhesive |
| Afterglow intensity | ISO 17398 Class C: 10 min >150 mcd/m², 60 min >20 mcd/m²Test standard: D65 light source, 1000 lux, 5 min excitation |
| Glow duration | Over 12 hours, measured down to 0.3 mcd/m² |
| Material safety | OEKO-TEX 100 Standard |
| Wash durability | 25 washes at 60°C (ISO 6330) and 5 dry clean cycles (ISO 3175) |
| Day / glow color | Light yellow/yellow-green |
| Width | 1 to 160 cm, customized width available |
Why Choose MHP-7371 Photoluminescent HTV
Photoluminescent performance: ISO 17398 Class C
Class C is the internationally recognized minimum luminosity grade for safety signage and evacuation systems. Afterglow tested to DIN 67510-1.
Bright, long and stable afterglow
Made with our strontium aluminate photoluminescent pigment, it has strong luminosity, long glow hour and fast charge time.
Clean finish after heat pressing
When heat-pressed onto garments, it delivers a clean and premium finish with no dark edges.
100% In-House Manufacturing & End-to-End Quality Control
As a leading manufacturer in the optical functional materials industry with 23 years of expertise, we produce not only the finished vinyl but also the strontium aluminate photoluminescent pigment in-house. We back our performance with scientifically measured luminance data, not just glow-hour claims.
How to Use Glow In The Dark HTV
We recommend pressing temperature: 135℃-155℃, pressing time: 9~15 seconds, pressure: 5~6 kg. Please wait until the glow in the dark HTV has cooled entirely before removing the PET protective film.
Note: Equipment and fabrics vary and you need to adjust the parameters accordingly. We strongly recommend performing a small trial press before proceeding with bulk production.
Frequently Asked Questions
No electricity or batteries are needed for it to glow. Our glow in the dark HTV is made with strontium aluminate photoluminescent pigment, which charges from daylight or indoor light and then releases that energy as an afterglow in the dark. It can act as an emergency lighting and safety back-up during emergencies or in dark environments.
MHP-7371 photoluminescent heat transfer vinyl meets ISO 17398 Class C: over 150 mcd/m² at 10 minutes and over 20 mcd/m² at 60 minutes.
The afterglow stays visible for over 12 hours, measured down to the 0.3 mcd/m² perception threshold. Always compare glow material by measured mcd/m² values rather than glow-hour claims alone.
ISO 17398 is the international standard that classifies photoluminescent (glow-in-the-dark) safety materials by how bright they glow and how long the glow lasts. Each class specifies the minimum luminance (mcd/m²) the photoluminescent material must maintain at 2, 10, 30, and 60 minutes after the light source is removed.
Class C is a sub-classification from ISO 17398, which is the afterglow intensity level required for safety signage and evacuation systems.
Our standard glow-in-the-dark HTV tape is 2 to 5 cm, we can also customize the width per your request from 1cm to 160cm.
Both are our glow-in-the-dark HTV with ISO 17398 Class C afterglow intensity.
MHP-8129 's surface also reflects, and offers higher wash and abrasion durability, while MHP-7371 has a smoother finish and softer hand feel.
Choose the grade that fits your needs, or contact us, and we will recommend the right one for you.
Ordering from us is very simple. You can contact us by filling out the Contact Us form, or send your inquiry directly to our email sales@mphotoluminescent.com.
You can also call us at 86-579-88948789. Our factory's work time is from 8AM to 5PM (UTC+8) Monday to Saturday.
Please let us know your application, requirements, and order amount, and we will reply to you by email and provide a quotation to you within 12hours. We always provide free samples for evaluation before bulk orders.
