MHR-8131 Photoluminescent Reflective Polyester Fabric
MHR-8131 Photoluminescent Reflective Polyester Fabric Introduction
MHR-8131 Photoluminescent Reflective Fabric Specification
We can customize the photoluminescent reflective fabric's size (1cm - 160 cm wide), patterns, reflectivity, and luminosity grades to meet your project requirements.
| Product model | MHR-8131 |
| Product type | Photoluminescent reflective fabric |
| Base material | Polyster |
| Afterglow intensity | Class C: 10 min >150 mcd/m², 60 min >20 mcd/m²Test standard: D65 light source, 1000 lux, 5 min excitation per ISO 17398 |
| Glow duration | Over 12 hours (measured down to 0.3 mcd/m²) |
| Reflectivity | 5-120 cd/ ( lx·㎡ ), customizable |
| Material safety | OEKO-TEX 100 Standard |
| Wash durability | 50 washes at 60°C (ISO 6330) and 25 dry clean cycles (ISO 3175) |
| Day/glow color | Light yellow/yellow-green |
| Width | 1 to 160 cm |
Glow-in-the-Dark and Reflective Fabric Application
MHR-8131 can be cut into all kinds of patterns with a laser, plotter, or die-cutter for sewing into finished garments and accessories, making it easy to add all-around visibility wherever it is needed
1. Safety and workwear: safety clothing, life vests, warning tapes, and uniforms for police, sanitation workers, firefighters, construction crews, and oil and gas personnel.
2. Everyday and sports apparel: knitwear, occupational clothing, casual wear, sportswear, fashion garments, children's clothing, shoes, hats, gloves, and backpacks.
3. Decorative detailing: the fabric can also be made into piping and badges, or printed and cut into custom shapes, adding both nighttime safety and a decorative touch.
Frequently Asked Questions
No electricity or batteries are needed for it to glow. Our glow in the dark HTV is made with strontium aluminate photoluminescent pigment, which charges from daylight or indoor light and then releases that energy as an afterglow in the dark. It can act as an emergency lighting and safety back-up during emergencies or in dark environments.
MHP-8131 photoluminescent heat transfer vinyl meets ISO 17398 Class C afterglow intensity standard, which is tested to be over 150 mcd/m² at 10 minutes test point and over 20 mcd/m² at 60 minutes test point
The afterglow stays visible for over 12 hours, measured down to the 0.3 mcd/m² perception threshold, which is the minimum level of light that the human eye can recognize. Always compare glow material by measured mcd/m² values rather than glow-hour claims alone.
ISO 17398 is the international standard that classifies photoluminescent (glow-in-the-dark) safety materials by how bright they glow and how long the glow lasts. Each class specifies the minimum luminance (mcd/m²) the photoluminescent material must maintain at 2, 10, 30, and 60 minutes after the light source is removed.
Class C is a sub-classification from ISO 17398, which is the afterglow intensity level required for safety signage and evacuation systems.
Ordering from us is very simple. You can contact us by filling out the Contact Us form, or send your inquiry directly to our email sales@mphotoluminescent.com.
You can also call us at 86-579-88948789. Our factory's work time is from 8AM to 5PM (UTC+8) Monday to Saturday.
Please let us know your application, requirements, and order amount, and we will reply to you by email and provide a quotation to you within 12hours. We always provide free samples for evaluation before bulk orders.
